Dip Switch - Used for various parameter settings. Serial Interface Connector (RS-232C) Used to connect the cutting plotter to a computer through a serial interface cable. Cutting Force Control Slider Set the blade force here. Parallel Interface Connector (Centronics) Used to connect the cutting plotter to a computer through a parallel interface cable. USB Interface Connector - Used to connect the cutting plotter to a computer through a USB cable. Power Switch On when switches to Off when switches to Right Hand Side (Figure 1-4) 4. AC Power Connector Used to insert the AC power cord. Grid Drum: Moves the media back and forth during the operation.įigure 1-2 Back View of BobcatBobcat Users Guide 1-1ġ 2 3 Fig 1-3 Left hand side view of Bobcat Left Hand Side (Figure 1-3)Ĥ 5 6 7 8 Fig 1-4 Right hand side view of Bobcatġ. Platen: The surface for holding and supporting the media during clear guide line marks. Knife Guide: Cuts off the extra media easily along the groove. Alignment Ruler: Media can be aligned with the Cutting Pad: Provides protection for the blade. Paper Sensor: The sensor detects the presence of the media. Control Panel: Consists of 10 control keys and 6 LEDs Pinch Roller: Presses the media against the grid drum during cutting. Thickness of the film (t1) Protrusion length of the blade Thickness of the base paper (t 2)ġ.1 Front View and Back ViewCutting Carriage: This unit performs the cutting with the installed pen or blade holder. Cutting Strip (Pad) Tip PenĪbout the BladeOffsetOFFSET is the distance that the blade tip is displaced from the centerline of the blade. Press ON/OFF LINE key or PAUSE key and then press DATA CLEAR key.Ĭhecking Supplied Items1. Terminate the cutting and clear the data in the buffer. Press ON/OFF LINE key to continue the cutting. Press PAUSE key, the LED above the key flashes. Change the value settings during the cutting. Press ON/OFF LINE key, the LED above the key lights. On-line condition The cutting plotter is ready to receive data from computer. Press ON/OFF LINE key, the LED above the key turns off. Off-line condition The cutting plotter is not ready to receive data from the computer. Then it will size themedia automatically according to the settings of the dip switch (usually the presetting is EDGE media type).Ĥ. It will take about 10 sec to initialize the machine. Place the media and pull the level to lower down the pinch rollers (must be sure the pinch rollers are position above the grid drums, that is, within the white marks). Note: Make sure the level is up before placing the media on the cutting plotter. Always put the pinch rollers within position of the white marks.ġ. Do not connect the power cable to a branch outlet or an extension cable. Always use the power cable from the accessory kits. Connect the power cable to a grounded outlet. PRECAUTIONS IN USEAlways hold the machine firmly from the bottom.ĭuring the operation, keep your clothes and hair away from any moving parts of the machine (such as the carriage and the drums). For your safety and the optimization of the machine, please read the following guide completely. IMPORTANT INFORMATIONThanks for purchasing Bobcat sign cutting plotters. 6-16.2 Light Indicators6-2 6.3 Cutting Plotter Quality Problems.6-5Īppendix 1. 6-1 6.1 What If the Cutting Plotter Cannot Operate. 5-1ĥ.2 Cleaning the Grid Drum.5-2 5.3 Cleaning the Pinch Rollers. Basic Maintenance.5-1 5.1 Cleaning the Cutting Plotter. Connecting Plotter3-1 3.1 Universal Serial BusUSB. 2.10 Pause Key 2.11 Repeat Key 2.12 Data Clear Key. 2.5 Media Loading 2.6 Tracking Performance 2.7 DIP Switch Setting. 2.3 Connecting the Power Cable 2.4 Blade Installation. Tel: +886-2-26946687 e-mail : 1.1ĬontentsImportant Information Quick Menu Supplied Items BladeĬhapter 1.Parts Names and Functions 1-11.1 Front View 1-1 1.2 Back View 1-2 1.3 Side View 1-3ġ.4 Control Panel 1-4 Chapter 2.Installation 2-12.1 Setting Up 2.2 Stand setting up. GCC 4F, No 236., Fu-Te 2nd Rd., His Chih, Taipei, Taiwan.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |